How to connect a 3D printer to a computer

Steps you need to do

For 3D printing you need to complete a few steps with your computer. As 3D printers for home users are relatively new, the machines are often not plug and play machines. In general, the following steps need to be fulfilled:
  1. To connect your printer, you need to plug it in using USB.
  2. Your computer needs to install the printers driver software just as it does when using other USB devices like a USB mouse.
  3. A printing software should be installed that either comes with the printer or has to be downloaded. There is a software that can preprocess your 3D model for printing called Repetier-Host which we will use.
  4. As this Repetier-Host can be used for any 3D printer, it needs to know the specifics of your printer.
The steps in details are following.

Connecting via USB

Most 3D printers can be connected via USB to your computer. Just use the cable that comes with your printer and always use it at the same USB port when possible. Make sure this USB port is working properly so no later communication problems arise.
Many 3D printers are run by Arduino microcontrollers.

Arduino-uno-perspective.jpg: Creative Toolsderivative work: JotaCartas [CC BY 2.0 (https://creativecommons.org/licenses/by/2.0)]
Many 3D printers are run by Arduino microcontrollers. Arduino-uno-perspective.jpg: Creative Toolsderivative work: JotaCartas [CC BY 2.0 (https://creativecommons.org/licenses/by/2.0)]

Installing the driver software

Depending on your operating system, printer drivers may be installed automatically. Often, newer operating systems like Windows 10 can do that. Also, there might be a 3D printer driver software that has also been shipped with your printer. Install it like you used to install driver software for computer mouses a while ago. In case you have an old operating system and no driver software was shipped with your printer, it needs to be installed manually. Two drivers usually work:
  • Arduino drivers
  • CH340/CH341 drivers
If you use Windows you can follow the steps described on the Arduino homepage: https://www.arduino.cc/en/Guide/DriverInstallation even if your printer is not Arduino-based.
  1. Open the device manager where you usually used to install driver software. If you do not find it in the Windows start menu, click on the Windows button and type devmgmt.msc - that is the device manager.
  2. Disconnect and reconnect the 3D printer by unplugging and replugging the USB cable to see which device in the list is popping up - this is your printer. It might has a yellow warning sign which means that a driver software is required.
  3. Right click on the icon of the printer. This opens a menu where you find the option install/update driver. This should download the required drivers or on older Windows versions will trigger an update to get them online.

Find the device manager quickly

Find the device manager quickly
On Windows, you find things by pressing the Window start button on the lower left and just start typing
If this is not working, you will have to install the drivers manually from the Arduino website directly. Installing the Arduino drivers works best by downloading the so called "Arduino IDE". You can download at https://www.arduino.cc/en/Main/Software Install the Arduino IDE by following the steps on the website. There are alot of different drivers in the package and you will have to agree to every single one to be allowed to be installed. In case this does not help either you have a CH340/CH341 microcontroller in your 3D printer. You can get the drivers from the following link: Since the producer of the microcontroller does not provide a package of driver software, these links might be invalid in the future. If that happens, google for CH340 or ch341 driver download and be sure to use an anti-virus/malware software to scan your download before installing.
Image

Downloading Repetier-Host and setting it up

There is either a software that comes with your printer or you might use other software like Repetier-Host to connect your PC to a 3D printer. You can find Repetier-Host at https://www.repetier.com/ and should choose a version for your operating system. This software is free but in case you are thankfull of and happy about it, you are kindly asked for a donation to keep it developed. This software provides several features:
  •   adding the 3D model to the build platform, move, scale, duplicate or mirror it
  • cutting your 3D designs into slices using a software called slicer - we will use the CuraEngine
  • creating a file containing information what exactly your 3D printer should do called a G-Code file
  • connecting to and controlling of your 3D printer - if you so choose
For creating the slices with the movement information for each layer, we need information about your used material and your chosen specifications regarding speed, cooling, whether you want a feature for the item to stick better and whether you want support and if, how it should be print. After installing the drivers for the printer so your computer now knows what machine is plugged in via USB, you should tell Repetier-Host information about your printer so it can communicate properly with the 3D printer. You find a detailed documentation at https://www.repetier.com/documentation/repetier-host/rh-installation-and-configuration/ explaining in detail what you should do to allow a connection between Repetier-Host and your printer and which troubleshooting options you have. The most important things you should check:
  • is the 3D printer powered and switched on?
  • is the 3D printer connected properly to your PC?
  • have you selected the correct port for communication?
  • have you selected the correct speed to send the G-Code commands - the baud rate?
For a good printing result, not only being able to talk to the 3D printer but also specifics are important. Find the settings you need to adapt at “Config” -> “Printer Settings” Which port is the one that talks to the 3D printer? You can find the port by trial and error since there will only be a few ports listed. If your printer is powered and connected via USB, select one port option after the other and and try to connect to your printer with each by pressing the pug icon on the upper left in Repeter-Host. If the port is not valid, an error message will pop up. If it is the correct port, you should be able to connect.
Settings about communicating with your 3D printer can be found in the printer settings
Settings about communicating with your 3D printer can be found in the printer settings

Find the port and baud rate

Find the port and baud rate
Where and how fast your computer talks to the printer is set with the port and baud rate
  How fast are you talking to the 3D printer? When you connect, you see loads of communication between your PC and your 3D printer shown at the bottom of Repetier-Host in the log which you can find on the bottom of the Repetier-Host window. If you can read it, meaning that you can only see human readable entries, your baud rate is correct. If you see strange characters which you cannot interpret, you have to change your baud rate. Start with the highest and reduce it try by try, until you see human readable output in the log. Usually log entries containing G-Code start with “M…”, “G…”, or “T…”.
Image
How big is your printer? Also in the printer settings, you find "Printer Shape" where you should set the X and Y maximum to the size of your printing plate. Then again add the width and depth to the values of X and Y and also add a maximum print height. Do not forget to Apply all changes. If you are done with these steps you should be able to click the icon on the top left with the plug and connect to your printer.
Repetier-Host needs to know the limits of your 3D printer so it does not move the printer head out of bounds.
Repetier-Host needs to know the limits of your 3D printer so it does not move the printer head out of bounds.